CRUSH-ALL

CRUSH-ALL

  • VERSATILE
  • MOBILE
  • SIMPLE and EASY TO OPERATE!
  • ONE MAN OPERATION
  • EFFICIENT
  • CRUSHES ANYTHING!
  • PRODUCES BEAUTIFUL SPEC MATERIAL.
  • EASY TO MAINTAIN.
  • REVERSIBLE AND REPLACEABLE WEAR PARTS.
  • CAN SPLIT IN HALF FOR MAINTENANCE OR TRANSPORT.
  • MOUNTS ON EXCAVATORS FROM 20-25-30-45 TONS.
  • USES EXISTING EXCAVATOR HYDRAULICS/HAMMER KIT (*most cases).
  • INEXPENSIVE
  • MADE IN USA!

crushall1 *THE HIGHEST OUTPUT BUCKET CRUSHER IN THE WORLD!!!   WE GUARANTEE IT!! We average (2) full buckets per minute at 2” minus setting. 1   TIME IS MONEY! LOOK NO FURTHER!! FEED 24” CHUNKS ALL DAY!!   CRUSH-ALL® is an IMPACT or JAW crusher in a bucket.  Fully ADJUSTABLE to make nearly any size you desire. RE-BAR and wire are no problem. Only two (2) reversible blow bars or jaw dies. Bars are available in a variety of materials. Jaw dies are made from manganese steel. CRUSH-ALL® is available in several models to fit nearly every application. Please refer to our “excavator requirement chart” when deciding what model CRUSH-ALL® will work for you. Don’t worry about the pin connection. We supply replaceable bushings to adapt CRUSH-ALL® to nearly every pin size. Quick disconnect hitches are no problem. Hydraulically speaking, most excavators with a 3rd valve or hammer kit will operate CRUSH-ALL® with only minor modifications. Regardless, we provide all the necessary schematic diagrams you will need to plumb your machine if required.  We make it simple and easy. Our in house hydraulic technicians are available to do complete installations including plumbing at your site our ours! *1Results based on CR75 & 125 will vary based on operator skill level and various other factors. Please consult your sales rep. for details.              

crushall3

CRUSH-ALL® IS ENVIRONMENTALLY FRIENDLY!

One diesel, one machine means less fuel consumed and exhausted. Recycling material that would otherwise be dumped at a landfill not only makes sense, it is the most COST EFFECTIVE SOLUTION. CRUSH-ALL® also comes standard with its own DUST SUPPRESSION SYSTEM to reduce dust discharge. Guard panels for the excavator are supplied to protect the windows and the operator. “HOW DO THE COSTS OF OPERATING CRUSH-ALL® COMPARE WITH OTHER CRUSHING SYSTEMS?” THE “LESS IS MORE” PRINCIPLE applies to CRUSH-ALL®. LESS PARTS = LESS EXPENSE! The design of other crushing systems is complex. These crushing systems require multiple components in order to operate. For instance, a hopper, feeder, auxiliary power, conveyors and more are required. NOT with CRUSH-ALL®! The beauty of CRUSH-ALL® is that, unlike other systems, CRUSH-ALL® combines these features into one machine, making CRUSH-ALL® extremely EFFICIENT. Since CRUSH-ALL® is an attachment, it does not require a loader to feed material in, and it does not require a conveyor or loader to stock pile. Thus, the SIMPLICITY of CRUSH-ALL® makes it significantly less expensive to operate and maintain and its RUGGED design provides for durability and longevity. “WHAT ABOUT MAINTENANCE AND PARTS?” GROUND BASED. All of the CRUSH-ALL® can be accessed from the ground. CRUSH-ALL’s® DESIGN is based on SIMPLICITY AND ACCESSIBILITY OF PARTS. Most portable crushing systems require ladders and cranes to service and access internal parts. Therefore, more time is spent trying to service, access and maintain portable crushing systems. CRUSH-ALL’s® SIMPLICITY OF DESIGN translates into easier maintenance and less parts. LESS PARTS = LESS POTENTIAL PROBLEMS = LESS COST. Most crushers require several hours, even days to replace simple wear parts, not CRUSH-ALL®! Less maintenance time means more run time. Also, CRUSH-ALL®‘s MODULAR DESIGN allows it to be disassembled in large pieces allowing the moving parts to have greater exposure. Modular means it is not cast on one piece, but rather several larger pieces. If the machine is damaged or wears in one area, simple replacement of a component can be done rather than replacing the entire frame. CRUSH-ALL® utilizes similar material for its wear parts as that of other industry standard crushers. This proven material ensures maximum life with the least expense.

crushall4FINISHED PRODUCT:

CRUSH-ALL® produces a beautiful cubical product and is fully adjustable to size material down to INCHES. For example, CRUSH-ALL® is capable of crushing concrete slabs down to 11/2″ minus base product and also makes a wonderful decorative stone from brick. The applications and products it produces are numerous.

crushall6

“HOW DOES CRUSH-ALL® COMPARE WITH OTHER ATTACHMENTS ON THE MARKET?”

There is NO comparison. CRUSH-ALL® is in a league all its own. SOME ATTACHMENTS THAT CLAIM TO BE CRUSHERS ARE SCREENS, UNCONTROLLED GRINDERS OR CRUNCHERS. CRUSH-ALL® IS A CRUSHER THAT FUNCTIONS SIMILARLY TO CRUSHERS FOUND ON PORTABLE PLANTS. ONE SIGNIFICANT DIFFERENCE BETWEEN CRUSH-ALL® AND OTHER ATTACHMENTS IS THAT CRUSH-ALL® IS DESIGNED TO OPERATE IN A CONTROLLED ENVIRONMENT. THE OPERATOR HAS MORE CONTROL OVER INPUT FEED SIZE, OUTPUT PRODUCT SIZE AND, IN SOME CASES, OUTPUT GRADATION. MOST LARGE PORTABLE CRUSHING PLANTS DO NOT OFFER THE CONTROL AND VERSATILITY FOUND IN CRUSH-ALL®. We are not aware of any other machine in the marketplace that incorporates ALL of the features of CRUSH-ALL® in one SIMPLE, COMPACT, AND COMPLETE PACKAGE.

crushall5

Click Here for the Brochure

Click Here for the Brochure

 

* All photos, specifications, and/or data is approximate and subject to change without notice. Information provided on this website is general and for the purpose of presenting an overview of the company, its abilities, and products. Use of material without the express written consent of R.R. is strictly prohibited and subject to penalties.